[A/S] Re: Refinishing Wood Cabinets Inside.

["caneflyfshr" <brad@xxxxxxxxxxxxxxxxxx>]

Hi Dan,  
Lots of great advise on stripping and varnishing. Keep in mind of the 
ambiant temperature at which you're working. My experiences have 
dictated not working with strippers, varnishes and even paint for that 
matter below 65 degrees. If I know I'm going to working with any paint 
or varnish the following day, I take it in the house and keep it on 
top of the fridge to keep warm. I've even been known to put a can of 
spray paint in about 2 inches of water in a pan and place it on the 
stove on low for 7 to 10 minutes just to get it warm. Amazing, I'm 
stripping and varnishing my '59 Trade Wind insides right now as well. 
Good luck.

Brad Norgaard
Phoenix
WBCCI #26