Re: [A/S] Door Window Shade

[Tony Turner <turners@xxxxxxxxxxxx>]

Measure the size and have one custom cut to size at any of the big
home center stores.  BUT, you have to drill out all the rivets in the
top half of the inner door skin to install it!  Remember measure
twice and cut once.  Oh, you will also need to sew a tab with a
snap on the bottom of your new shade to hold it down in the closed
position.  And remove the ratchet device in the end of the shade
roller.  Also, the stick through the bottom loop of the shade material
should be left about an inch longer then the shade itself.  That is
what stops the shade from unwinding itself at the top of it's travel.

If this is not clear, you may email me off list for more details.
I've done this twice and it works fine.

Tony KC9BTA
'00 28' Excalla
'03 2500HD Duramax/Allison