Re: [A/S] Hitch height help

[Charlie/Betty Burke <cbburke@xxxxxxxxxxxxx>]

Joe

Ball height is the distance above level ground of the coupler when the coach 
is in the preferred towing position (level). This number is used to set the 
ball height of a weight distributing hitch to establish the correct 
position/height when the hitch is attached and ready to tow. Truck height, 
loaded or unloaded should not be factored in to this number. Simple put the 
hitch head into the receiver on the truck and measure. Then do what it takes 
to get the hitch ball to that height.

Charlie