Re: [A/S] 1968 Cabinet/Bulkhead Finish

[garyz620@xxxxxx]

As a woodworker wannabe I can tell you that matching stain is a certain 
amount talent but a large part having the right supplies.  Most woodworkers 
use combinations of basic colors of dyes (red, yellow, blue) added to stains 
to alter the color.  These can be used as a stain or over a finished surface 
as a glaze.  There is a modest investment of time and money involved.  Much 
trial and error on scraps.  If you're willing to learn I applaud you.  Visit 
the local library and start reading.  If you're only interested in getting 
the job done I'd suggest you find a good local furniture repair shop and ask 
them to mix up a quart of magic potion for you.  Probably cheaper and faster. 
 Don't forget the finish (the top protective layer).  If the sheen doesn't 
match it can look just as bad as having the wrong color.  Start with a high 
gloss finish and work your way down to low sheen in steps until you get the 
right degree of gloss.  

Gary Zook
Lincoln, NE