RE: [A/S] Shower Leak

["Tripp, George" <GTripp@xxxxxxxxxxxxxxx>]

Hi Mike;
How frustrating are those leaks. here are a couple of ideas: to begin, try
to access the line by removing the bottom of the medicine cabinet. That
should give you enough room to access the broken line. Another possibility
is to slip a rubber hose over the break in the line and to clamp it.
However, I doubt that you will be able to reach the line. Third, and if you
are desperate, cut the feed lines to the mixing valve at an accessible spot,
and you should be able to then pull the mixing valve out through the tub
enclosure. However, you will probably still have to remove the bottom of the
medicine chest to be able to loosen the spout from the valve body.
I hope that this helps...I am not exactly sure about the configuration of
your trailer.

PS. If all else fails, you might be able to get some sort of access through
the tail light bezels. When the bezel is removed there is a large access
opening, but it is probably too high up.
Good luck!
george