Re: [A/S] Electric Brakes & Controllers

["Dr. Gerald N. Johnson, electrical engineer" <geraldj@xxxxxxxx>]

Jim, my '68 owner's manual has it a bit differently:
"2. Jack the wheel up so you can spin it by hand; tighten the brakes
(using a brake adjusting tool or a screwdriver that has been bent to a
90 degree angle) until the wheel is locked; then back off until you have
a free spinning wheel (which will be approximately 15 notches)."

Maybe that 15 notches will give a slightly slower and more controlled
brake application. May have to try that.

Gerald J.