[a/s] '91 vs. '93 -Jacks Black Water tank etc.

["Rich Walbridge" <wbcci@xxxxxxx>]

My '93 has 2 jacks in front instead of the one near the hitch ball.  Works
good!

> ANOTHER QUESTION I FORGOT EARLIER: Where is the adjustment panel for the
> holding tanks monitor panel? The manual refers to calibrating a system
that
> was perhaps used years before, but the instructions clearly do not apply
to
> mine - I don't have the adjustment panel where they say it is. Most of my
> monitor readouts seem to work, but the black water holding tank always
> indicates 3/4, even when full _or_ empty!

I will look in my book...seems I read something about that, now that you
mention it.  When we wash the black water tank the readout reads empty, but
when we begin to use it, the readout goes to 2/3s full.  We just eyeball it
down the open toilet.  I've filled it with clean water, put baking soda into
it and took it for a 25 mile ride--to no avail.  Nothing changed.  I think
Hunter said that hers was NG too.  The sensor is probably laying down in
there.(?)

Do you have any knowledge about what the govt. is going to do with regard to
the lay-down gas bottles?  I don't think the standup kind vs. the lay-down
kind are the same when it comes to replacing the old valves with new valves
that we have to convert to in a couple of years.  (?)
Rich Walbridge
mailto:richwalbridge@airstream.net
WBCCI#3371

93LTDOklahoma.jpg