RE: [A/S] entry door suicided need new old door!

["Perry Joe Scudder" <perryjoe@xxxxxxxxxxxxx>]

>   i'm looking for a door for my 1971 31' Excella 500
> 
>  any help finding a door would be appreciated, one year of major 
> water /winter leaks is Enough... thanks  Mark in Colo.
 
Hi Mark,
If you are replacing your door because it has been bent out toward straight,
you can get it back to the correct curve to make a good seal very easily by
putting a piece of 2X4 wood in the door and pushing it closed by pushing on
the top and bottom of the door at the same time. Just keep pushing closed
then take the wood out and check for fit, repeat until curve matches
opening.

Joe Scudder
WBCCI 8624