[A/S] Re: Adjustable Pedals and Ultima 2020

["maurice_riggins" <maurice.riggins@xxxxxxxxxxxxxxxx>]

That was me.  The Ultima has a clamp that has to go on the brake 
pedal arm.  The arm above the adjustment motors is a bit too wide for 
the current Ultima clamp.  Jordan tells me he'll be shipping a new 
clamp that'll handle it in a couple of weeks.

If it never materializes, I have a piece of fairly heavy steel 
strapping (used to hang the rear of car stereos) that I'll bend to 
fit the pedal and mount the spring unit.

FWIW, I plan to mount my controller on the left side of the fuse 
cover by the drivers door.  The cable runs down nicely under and 
behind the cover and up and over the metal crossbar below the 
steering wheel.  That's where I'll anchor the cable housing and it'll 
give a straight shot to the clamp just above the adjustment motor.

The Ford plug in wire, combined with the long wires on the Ultima, 
will make it easy to route the wires to the plug on the right side of 
the steering wheel.
--
Maurice
WBCCI 5446