Re: [A/S] Re: restoring a 1973 airstream

[tinhutjohn <sargeant@xxxxxx>]

Tinman
I used Tyvek tape. You know the really sticky red tape that builders use
to seal the edges of tyvek that is used to wrap houses. I used it on the
little tambour doors under the sink and it sticks like stink. So far
they have not come apart.  The tape is applied to the backside, of
course. I found it was best to cut a piece of the right length, attach
it to one edge with half sticking out and then move the next section of
door slats over and stick them to the tape. The tape should withstand
heat and cold, as it is meant to be on the cold side of the house wrap.
John & Louise Sargeant
WBCCI #5530
London Ontario Canada