[A/S] Re: water heater and cable

["Lee Clary" <glclary@xxxxxxxxx>]

To solve our need for a dish wire to our 98 31: when I discovered 
that the dish wouldn't work through the normal park cable entrance, I 
removed the wall plate (the one with the red light on it). There I 
found three cables tied in to some electronic circuity, one from the 
park cable entrance, one from the roof antenna, and the third from 
the bedroom. Each one of these cables is terminated by an F connector 
like the one that screws into the back of your tv or satellite 
receiver. I figured out which cable went to the electric hookup box 
for the park cable. Then I drilled a hole in the wall plate and 
mounted a barrel connector (2 bucks at Radio Shack) into the hole and 
connected the park cable to the inside of the barrel. I then replaced 
the wall plate. Now I have two cables going to the wall plate; one is 
for the regular antenna and connects to the "anntenna in" connector 
on the sat reciever. The other goes to the satellite receiver on 
the "dish in" connection. The only modification is to the wall plate 
which is available at electronic and rv stores should I want to "undo 
it".
This works very well for us. 
I hope this helps someone.

Happy camping
Lee