RE: [a/s] shell 3'above traler

[Roy Lupien <alpha@xxxxxxxx>]

 Hi George
the u chanel is faceing up and the sides are riveted to it. The chanel sits
on top of the "sole"(boatbuilder lingo) and is screwed and bolted from the
top inside, The inside lower wall must be removed or the bottom bent up to
axcess the fastenings. some of the bolts I cut off from under the trailer.
I had to take the belley pan off for ti was full of mouse nests and wet
insulstion. Nice? I had removed part of the interior, sink, stove, fridge,
and port and starbord beds, The head stayed with the shell. I did not have
to remove any bolts around the back for it was rotted from side to side. If
you need info I have 150 pix to date, and have lerned a bunch of tricks. I
have about 70 hrs and the floor should be going on next week. and
recuppeling soon after.