[VAC] Re: Floor repair/replace question

["My Airstream" <myairstream@xxxxxxx>]

Thanks William for the eye-opener on floor replacement.  I've been following
the thread because I am just about to start repairs on my 66 Safari.  I
pulled out the old asbestos tile and got rid of it at our hazardous dump
site.

It came up easily except under the couches.  The screws that hold the
couches in place will only come out with an impact screw driver and I am
wondering if it would not be better to just leave the small amount of old
tile that is wedged under the couches and flush mount the new tile?

The floor looks good except by the door where weather has taken it's toll
and there is a small amount of rot.  There is also a trace of rot in the
head but not large.  Big problem for me is that someone installed a floor
heater in the bathroom.  It doesn't work so we will be pulling it.  That
will leave two rectangular holes.  The largest hole is 14' x 20'.  I am
definitely in the dark about how to make a solid patch for a hole this
large.  The surrounding area appears solid and dry.  Any suggestions would
be appreciated.

I would to join the school that believes epoxy is a good way to go.  Living
right near Oceanside Marina, I have an excellent source of technical help
nearby.  Thanks for all the good info on floors.  I have taken the liberty
of pruning the Subject title and cutting the previous message which was very
informative and very long.  Thanks William!


Bob Kiger  http://cruiserbob.com
66 Airstream Safari
Mira Mar Mobile Park
Oceanside, CA