Re: [A/S] OSB floor and penetrating epoxy??'s

[JSmith1805@xxxxxxx]

What wea the orifional floor crovering was it glued down or carpet? If glued 
down the old glue residue needs to be cleaned offMineral spirits  a wire brush 
and plenty of wiping cloths and good venitlation.Are the water spots along 
the outer walls? if so I would tilt the trailer A little side to side and end to 
end pour a bead of penetrating epoxy along the edges and let it wick under 
the channel to prevent future damage. I would than paint the intire floor with a 
coat of penetrating epoxy let cure a few dats and than put what ever floor 
crovering you wish. I am assuming that your trailer was built by a food compeant 
and the bean counters were in controll Obe is a lot cheeper than good ply and 
their purpose in life was not to build a quality product but to maximise the 
profit.
If you need a good address for penertating epoxy at a very reasonable price 
contact me.
JIM SMITH