Re: [A/S] Re: airstream polishing

[Chris Elliott <celliott@xxxxxxxxxxxx>]

Hi ,
     I would try any scotch brights on a small , out of sight place , even 
the micro-fine scotch brights will scuff the aluminium and be next to 
impossible to polish out. The aluminium alclad is soft  stuff .
     I use  Napier Environmental Technologies stripper made for clearcoat 
removal called SV-35 . Made for aluminium aircraft repair , pricey but very 
effective and goes a long way .  Spray, brush or roll it on and hose it off 
with water. Try not to let it dry , its a timing thing letting it soften 
enough , I used a squeegie to get it off in one pass . The streaks of goo are 
harder to get off the second time .
Environmentally safe, non toxic and really works well. Available from
Aircraft Spruce Company.
   Chris