[A/S] Re: dual input

["Maurice Riggins" <maurice.riggins@xxxxxxxxxxxxxxxx>]

Jim, I've uploaded WinegardSat.pdf to the files area.  It shows how 
to hook the sat dish into the jack for the Winegard amplified crank 
up antenna.  Airstream already did it in mine.  The cable from the 
power cord compartment runs through a short piece of coax in the 
credenza and then goes up to the plate for the plug in antenna.  You 
replace that short piece of coax with a sat receiver.  When the 
amplifier is on, it feeds over-the-air crank up signal to the TV.  
When the amp is off, it feeds signal from the sat receiver to the TV.
I'd have to rewire at that plate to feed the TV signal into the sat 
receiver and view it on channel 3 or 4 the way many people hook it up 
at home.

Hope this helps,
--
Maurice
WBCCI 5446